SIMAIR—Evaluation tool for meeting the EU directive on air pollution limits

Almost all Swedish cities need to determine air pollution levels—especially PM10—close to major streets. SIMAIR is an internet tool that can be used by all Swedish municipalities to assess PM10, NO₂, CO and benzene levels and how they compare to the EU directive. SIMAIR is delivered to the municipalities with all required input data pre-loaded and is meant to be used prior to decisions if and where, monitoring campaigns are required. The system includes a road and vehicle database with emission factors and a model to calculate non-tailpipe PM10 emissions. Regional and urban background contributions are pre-calculated and stored as hourly values on a 1×1 km² grid. The local contribution is calculated by the user, selecting either an open road or a street canyon environment.A comparison between measured and simulated concentrations in four street locations shows that SIMAIR is able to calculate statistics of yearly mean values, 90-percentile and 98-percentile daily mean values and the number of days exceeding the limit value that are well within ±50% that EU requires for model estimates of yearly mean values. In comparison, all values except one are within ±25% which is the quality objective for fixed measurements according to the EU directive.The SIMAIR model system is also able to separate the percentual contribution of the long-range transport from outside the city, the city contribution and the local contribution from the traffic of an individual street.     

Estimates of black carbon and size-resolved particle number emission factors from residential wood burning based on ambient monitoring and model simulations

In this paper we derive typical emission factors for coarse particulate matter (PM(10)), oxides of nitrogen (NO(x)), black carbon (BC), and number particle size distributions based on a combination of measurements and air quality dispersion modeling. The advantage of this approach is that the emission factors represent integrated emissions from several vehicle types and different types of wood stoves. Normally it is very difficult to estimate the total emissions in cities on the basis of laboratory measurements on single vehicles or stoves because of the large variability in conditions. The measurements were made in Temuco, Chile, between April 18 and June 15, 2005 at two sites. The first one was located in a residential area relatively far from major roads. The second site was located in a busy street in downtown Temuco where wood consumption is low. The measurements support the assumption that the monitoring sites represent the impact of different emission sources, namely traffic and residential wood combustion (RWC). Fitting model results to the available measurements, emission factors were obtained for PM(10) (RWC = 2160 +/- 100 mg/kg; traffic = 610 +/- 51 mg/veh-km), NO(x) (RWC = 800 +/- 100 mg/kg; traffic = 4400 +/- 100 mg/veh-km), BC (RWC = 74 +/- 6 mg/kg; traffic = 60 +/- 3 mg/veh-km) and particle number (N) with size distribution between 25 and 600 nm (N(25-600)) (RWC = 8.9 +/- 1 x 10(14) pt/kg; traffic = 6.7 +/- 0.5 x 10(14) pt/veh-km). The obtained emission factors are comparable to results reported in the literature. The size distribution of the N emission factors for traffic was shown to be different than for RWC. The main difference is that although traffic emissions show a bimodal size distribution with a main mode below 30 nm and a secondary one around 100 nm, RWC emissions show the main mode slightly below 100 nm and a smaller nucleation mode below 50 nm.     

Isolation of culturable mycobiota from agricultural soils and determination of tolerance to glyphosate of nontoxigenic Aspergillus section Flavi strains

Glyphosate-based herbicides are extensively used in Argentina's agricultural system to control undesirable weeds. This study was conducted to evaluate the culturable mycobiota [colony forming units (CFU) g^?1 and frequency of fungal genera or species] from an agricultural field exposed to pesticides. In addition, we evaluated the tolerance of A. oryzae and nontoxigenic A. flavus strains to high concentrations (100 to 500 mM – 17,000 to 84,500 ppm) of a glyphosate commercial formulation. The analysis of the mycobiota showed that the frequency of the main fungal genera varied according to the analyzed sampling period. Aspergillus spp. or Aspergillus section Flavi strains were isolated from 20 to 100% of the soil samples. Sterilia spp. were also observed throughout the sampling (50 to 100%). Aspergillus section Flavi tolerance assays showed that all of the tested strains were able to develop at the highest glyphosate concentration tested regardless of the water availability conditions. In general, significant reductions in growth rates were observed with increasing concentrations of the herbicide. However, a complete inhibition of fungal growth was not observed with the concentrations assayed. This study contributes to the knowledge of culturable mycobiota from agricultural soils exposed to pesticides and provides evidence on the effective growth ability of A. oryzae and nontoxigenic A. flavus strains exposed to high glyphosate concentrations in vitro.     

Prenatal magnetic resonance imaging detection of temporal lobes and hippocampal anomalies in hypochondroplasia

Hypochondroplasia (HCH) is a genetic skeletal dysplasia, inherited in an autosomal dominant fashion. About 50–70% of HCH patients have a mutation in FGFR3 gene and in the majority of cases it is a de novo mutation. Recent magnetic resonance imaging studies on relative large cohorts of HCH patients have showed a central nervous system involvement with a high incidence of characteristic temporal lobe and hippocampal abnormalities. To the best of our knowledge, this report shows the first magnetic resonance imaging prenatal detection of characteristic brain anomalies in a case of HCH, molecularly confirmed through postnatal FGFR3 analysis. © 2014 John Wiley & Sons, Ltd.     

State-wide increase in prenatal diagnosis of klinefelter syndrome on amniocentesis and chorionic villus sampling: Impact of non-invasive prenatal testing for sex chromosome conditions

Background

To analyze population-based trends in the prenatal diagnosis of sex chromosome aneuploidy (SCA) since the availability of non-invasive prenatal testing (NIPT).

Methods

Retrospective state-wide data for all prenatal diagnoses performed <25 weeks gestation from 2005 to 2020 in Victoria, Australia. Non-invasive prenatal testing became locally available from 2012. The prenatal diagnosis rates of SCA as proportions of all prenatal diagnostic tests and all births were calculated. Statistical significance was assessed with the χ² test for trend, with p < 0.05 considered significant.

Results

46,518 amniocentesis and chorionic villus sampling were performed during the study period, detecting 617 SCAs. There was a significant increase in the rate of prenatal SCAs from 5.8 per 10,000 births in 2005 to 8.7 per 10,000 births in 2020 (p < 0.0001). This increase was predominantly due to 47,XXY cases, 91% of which were ascertained via positive NIPT for this condition in 2020. The prenatal diagnosis rate of 47,XXY significantly increased from 0.8 per 10,000 births in 2005 to 4.3 per 10,000 births in 2020 (p < 0.0001).

Conclusion

Screening for SCAs using NIPT has directly led to an increase in their prenatal diagnosis on a population-wide basis, especially 47,XXY. This has implications for clinician education, genetic counselling, and pediatric services.     

Two methods to assess vulnerability to climate change in the Mexican agricultural sector

We applied two methods to assess vulnerability to climate change in Mexico’s agricultural sector. The first one was a principal component analysis (PCA) that weighted each variable separately. For the second one, we integrated the variables in a linear array in which all variables were weighted equally, and then, we used the arithmetic sum of the sub-indices of exposure and sensitivity minus the adaptive capacity to obtain the vulnerability index. We discuss the similarities and differences between two methods with respect to municipal-level maps as the outputs. The application of the method for the agricultural sector in Mexico gave us the spatial distribution of the high- and very-high vulnerability categories, which we propose as a tool for policy. The methods agreed that the very-high vulnerability category is present in 39 municipalities. Also we found that 16 % of the total population in the country is located in high-exposure areas. In addition, 41 % lives in municipalities identified as highly-sensitive. In terms of adaptive capacity, 20 % of the population lives in 1273 municipalities with low-adaptive capacity. Finally, we discuss the need for information regarding vulnerability at the national level to guide policies aimed at reducing exposure and sensitivity and increasing adaptive capacity.     

Effects of Fish Stocking on Ecosystem Services: An Overview and Case Study Using the Stockholm Archipelago

In this article, we focus on documented and possible effects of fish stocking in terms of ecosystem services. The increasing use of fish stocking between 1970 and 2000 in the semiurban setting of Stockholm archipelago, Sweden, is used as case study. The objective is to analyze this management practice from an ecosystem perspective, accounting for both the ecological and social context of releasing fish. The results show that enhancements of four native species (Salmo S. trutta, Salmo salar, Stizostedion lucioperca, and Anguilla anguilla) have dominated over new introductions of one nonnative species. (Oncorhynchus mykiss). The major objective has been to increase fish catches for local resource users. Involved stakeholders include three management agencies, one hydropower company, and several local sport fishing associations. Documented effects focus on recapture and production rates. However, our analysis suggests that additional positive or negative effects on biodiversity, food web dynamics, mobile links, or ecological information may also result, with possible consequences for the long-term provision of food, game, and aesthetic values. We conclude that a more adaptive and cooperative management approach could benefit from a deeper analysis of where, when, and what species is released, by whom, which stakeholders that use the fish and those ecosystem services the fish generate, and of the role of formal and informal institutions for monitoring and evaluating the success of releasing fish.     

Synchronous variation in water chemistry for 80 lakes in Southern Sweden

Variation in water chemistry was studied in 80 lakes in southern Sweden. The lakes had forest dominated catchments. The length of the time series was 14 years. Synchrony was calculated as Pearsons product moment correlation coefficients for all combinations of lakes, i.e. 3160 lake-pairs. The chemical variables studied were non-marine sulphate (SO₄ ^*), non-marine calcium (Ca^*), absorbance and acid neutralising capacity (ANC). Statistically significant synchrony occurred in 93% of all lake-pairs for SO₄ ^*, and between 58 and 67% for absorbance, Ca^* and ANC. In 70% of all lake-pairs, the synchrony was \s>0.71 for SO₄ ^*, which means that more than half of the variation in one lake could be explained by the variation in the other lake. For absorbance, Ca^* and ANC, about 25% of the lake-pairs had a synchrony \s>0.71. The relatively high synchrony for SO₄ ^* occurred during an overall downward trend in SO₄ ^* concentration.The degree of synchrony in our study was at a level comparable to other studies in northern America and England. However, our study included lakes in a much larger area, with distances of up to 500 km between the lakes, while earlier studies were made on small lake districts with lakes located within approximately 50 km. In contrast to these earlier studies, there was no correlation between synchrony and distance, lake characteristics or catchment characteristics. However, when a small subset of 15 lakes in the southeast of Sweden was selected, such relations were found.     

Remediation of drinking water contaminated with arsenic by the electro-removal process using different metal electrodes

The purification of water by the electro-removal process using different metal electrodes is widely used in different spheres of science and industry. The comparative characteristics under galvanostatic conditions of zinc (Zn), brass (Cu-Zn), copper (Cu) and iron (Fe) anodes for arsenic (As) removal from water by the electro-removal process in laboratory scale experiments were determined at current densities of 1.5, 3 and 12 mA cm(-2) for 60 min, from a solution containing different concentrations of As(v) (from 70 to 130 microg L(-1)). The results at these different current densities indicated that rapid arsenic removal was achieved at higher current densities (12 mA cm(-2)), with the chemical precipitation of arsenate complexes. The removal of As was relatively efficient, with the following tendency (at 1.5 mA cm(-2)): Fe (>93%) congruent with Zn (>93%) > Cu-Zn (>73%) >Cu (>67%), these efficiencies were relatively independent of the removal rate for all the initial arsenic concentrations investigated. This behaviour is attributed to the electrochemical intrinsic properties of the most active metals, and to the chemical precipitation reactions following the electrochemical process, iron being the most attractive metal for arsenic removal for practical applications.     

Incentives and outcomes: Evaluation of a Swedish environmental subsidy programme

This paper empirically evaluates a Swedish government subsidy to environmental sustainability, the Local Investment Programme (LIP). During the programme period, 1998 – 2002, more than 670 million was granted to 1814 different municipal projects, making it the largest Swedish subsidization to ecological sustainability to date. For the 682 projects evaluated here, it was found that the projects were rewarded smaller subsidies than granted. To explain the gap between granted and rewarded subsidies, the gap was decomposed into a quantity effect, depending on the quantified environmental and employment outcomes of the projects, and a price effect, depending on the government's valuation of these outcomes. Whereas no statistically significant quantity effect was found, there was a large statistically significant price effect, indicating that the government paid the municipalities less than promised in the granting decision.